Craftsman CMXGWAS020813-00 Pressure Washer Manual

The Craftsman CMXGWAS020813-00 is a powerful pressure washer designed for efficient cleaning of various surfaces. It features a 2.3 GPM (gallons per minute) water flow rate and a 2000 PSI (pounds per square inch) pressure output, making it ideal for tackling tough dirt and grime on driveways, decks, and vehicles. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Pressure Washer 8. Maintenance and Care 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 2000 PSI pressure output, 2.3 GPM water flow rate, adjustable spray nozzle, detergent tank, and a 25-foot high-pressure hose.

Feature	Description
2000 PSI	Powerful pressure for effective cleaning
2.3 GPM	High water flow rate for efficient cleaning
Adjustable Spray Nozzle	Customizable spray patterns for different tasks
Detergent Tank	Built-in tank for easy detergent application
25-foot Hose	Extended reach for larger cleaning areas
Wheels	Easy mobility for transport
Power Cord	Grounded for safety during operation

Installation

Unpack and inspect contents. Ensure all parts are included and undamaged.

Attach the handle to the main unit using provided screws.
Connect the high-pressure hose to the spray gun and pressure washer.
Fill the detergent tank with appropriate cleaning solution.
Plug the power cord into a grounded outlet.

WARNING! Ensure the unit is on a stable surface and all connections are secure before use.

First-Time Setup

Power on the pressure washer; follow the setup instructions.

Set the spray nozzle to the desired pattern.
Turn on the water supply and check for leaks.
Press the power button to start the unit.
Test the spray on a small area before full use.

CAUTION! Always wear appropriate safety gear while operating the pressure washer.

Specifications

Model: CMXGWAS020813-00
Pressure Output: 2000 PSI
Water Flow Rate: 2.3 GPM
Hose Length: 25 feet
Power Source: Electric
Weight: 40 lbs
Dimensions: 20 x 18 x 36 inches

Controls and Settings

Access controls via the main unit: Power button, spray nozzle adjustment, and detergent selection.

Spray Patterns: Adjust the nozzle for fan, cone, or jet spray.

Maintenance settings include checking oil levels and cleaning filters regularly.

Connecting Accessories

Compatible with various accessories for enhanced cleaning.

Turn off the unit before connecting accessories.
Match the accessory to the appropriate port.
Ensure all connections are secure before use.

Tip: Use only Craftsman-approved accessories for optimal performance.

Operating the Pressure Washer

Follow these steps for safe operation:

Ensure the area is clear of obstacles.
Start the pressure washer and adjust the spray as needed.
Keep a safe distance from surfaces to avoid damage.
Turn off the unit and disconnect when finished.

WARNING! Do not point the spray at people or animals.

Maintenance and Care

Regular maintenance is essential for longevity.

Unplug and disconnect the unit before performing any maintenance.

CAUTION! Clean filters and check hoses for wear regularly.

Safety Information

Read all safety instructions before use. Always wear safety goggles and gloves.

WARNING! Do not operate in wet conditions or near flammable materials.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Unit won't start	No power	Check power source and connections.
No water pressure	Blocked hose	Inspect and clear any blockages.
Leaking water	Loose connections	Tighten all connections securely.
Spray pattern inconsistent	Dirty nozzle	Clean or replace the spray nozzle.

Reset: Disconnect power and reconnect to reset the unit.

Service: For assistance, contact Craftsman customer service.