Craftsman CMXGWAS020805 Pressure Washer Manual

The Craftsman CMXGWAS020805 is a powerful pressure washer designed for efficient cleaning of various surfaces. With a 2000 PSI and 1.2 GPM, it is ideal for tackling tough dirt and grime on patios, driveways, and vehicles. This manual provides essential information on safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Pressure Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: 2000 PSI motor, adjustable spray nozzle, detergent tank, 25-foot high-pressure hose, and onboard storage for accessories.

FeatureDescription
2000 PSI MotorPowerful motor for effective cleaning
Adjustable Spray NozzleCustomize spray pattern for different tasks
Detergent TankBuilt-in tank for easy soap application
25-Foot HoseLong reach for versatile cleaning
Onboard StorageConvenient storage for nozzles and accessories

Installation

Unpack the pressure washer and check for all components. Place the unit on a flat surface.

  1. Attach the high-pressure hose to the spray gun and the pressure washer.
  2. Connect the garden hose to the water inlet.
  3. Fill the detergent tank if using soap.
  4. Plug the unit into a grounded outlet.

WARNING! Ensure all connections are secure before starting the unit.

First-Time Setup

Power on the pressure washer; follow the setup instructions.

  1. Turn on the water supply and check for leaks.
  2. Set the spray nozzle to the desired setting.
  3. Start the pressure washer and allow it to build pressure.
  4. Test the spray on a small area before full use.

CAUTION! Always wear safety goggles when operating the pressure washer.

Specifications

Controls and Settings

Access controls via the pressure washer's panel. Key controls include the power switch, spray nozzle adjustment, and detergent control.

Safety Features: Automatic shut-off, thermal protection.

Connecting Accessories

Connect various accessories for enhanced cleaning.

  1. Ensure the pressure washer is off before connecting accessories.
  2. Match the accessory to the correct port on the pressure washer.
  3. Secure connections to prevent leaks.

Tip: Refer to the accessory manual for specific instructions.

Operating the Pressure Washer

Follow these steps for effective operation:

  1. Turn on the water supply.
  2. Start the pressure washer and allow it to build pressure.
  3. Use the spray gun to clean surfaces, adjusting the nozzle as needed.
  4. Turn off the pressure washer and water supply when finished.

WARNING! Do not point the spray gun at people or animals.

Maintenance and Care

Regular maintenance ensures optimal performance.

  1. Check and clean the filter regularly.
  2. Store the pressure washer in a dry place.
  3. Inspect hoses for wear and tear.
  4. Flush the system with clean water after each use.

CAUTION! Unplug the unit before performing maintenance.

Troubleshooting

SymptomPossible CauseCorrective Action
Pressure washer won't startNo powerCheck power source and connections.
No water pressureClogged hose/filterInspect and clean hose/filter.
Leaks from connectionsLoose fittingsTighten all connections securely.
Spray pattern is inconsistentDirty nozzleClean or replace the spray nozzle.

Service: For further assistance, contact Craftsman support.

Craftsman CMXGWAS020805 Pressure Washer Manual © - All Rights Reserved 2026