Craftsman CMXGWAS020735 Pressure Washer Manual

The Craftsman CMXGWAS020735 is a powerful pressure washer designed for efficient cleaning of various surfaces. It features a 2.3 GPM (gallons per minute) water flow rate, a 25-foot high-pressure hose, and multiple nozzle options for versatile cleaning tasks. This manual provides essential information on safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Pressure Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: 2.3 GPM water flow, 25-foot high-pressure hose, adjustable spray nozzle, detergent tank, and a powerful electric motor.

FeatureDescription
Water Flow Rate2.3 GPM for efficient cleaning
High-Pressure Hose25-foot hose for extended reach
Adjustable NozzleMultiple spray patterns for various cleaning tasks
Detergent TankBuilt-in tank for easy detergent application
Electric MotorPowerful motor for reliable performance
WheelsEasy mobility for maneuvering around the workspace

Installation

Unpack the pressure washer and ensure all components are included. Place the unit on a stable surface.

  1. Connect the high-pressure hose to the pressure washer and the spray gun.
  2. Attach the garden hose to the water inlet.
  3. Ensure the detergent tank is filled if using detergent.
  4. Plug the unit into a grounded electrical outlet.

WARNING! Ensure all connections are secure before operating. Do not operate without water supply.

First-Time Setup

Power on the pressure washer and follow the setup instructions.

  1. Set the desired spray nozzle for the cleaning task.
  2. Turn on the water supply and check for leaks.
  3. Press the power button to start the unit.
  4. Test the spray pattern before beginning cleaning.

CAUTION! Always wear appropriate safety gear when operating the pressure washer.

Specifications

Controls and Settings

Access controls on the front panel: Power button, spray nozzle adjustment, and detergent control.

Spray Nozzle: Rotate to adjust spray pattern (fan, jet, etc.).

Detergent Control: Switch to apply detergent during cleaning.

Connecting Accessories

Connect various accessories such as brushes or extension wands for enhanced cleaning.

  1. Ensure the pressure washer is turned off before connecting accessories.
  2. Match the accessory to the spray gun and secure it.
  3. Test the connection before use.

Tip: Use the appropriate accessory for the cleaning task to achieve the best results.

Operating the Pressure Washer

Follow these steps to operate the pressure washer effectively.

  1. Turn on the water supply and ensure all connections are secure.
  2. Press the power button to start the unit.
  3. Adjust the nozzle to the desired spray pattern.
  4. Begin cleaning by pulling the trigger on the spray gun.

WARNING! Do not point the spray gun at yourself or others.

Maintenance and Care

Regular maintenance is essential for optimal performance.

  1. After each use, disconnect the water supply and run the unit for a few seconds to clear the hose.
  2. Check and clean the filter regularly.
  3. Store the pressure washer in a dry place when not in use.

CAUTION! Always unplug the unit before performing maintenance.

Troubleshooting

SymptomPossible CauseCorrective Action
No powerPower cord unpluggedCheck power connection and plug in.
Low pressureClogged nozzleClean or replace the nozzle.
Water leaksLoose connectionsTighten all connections.
Unit won't startTripped circuit breakerReset the breaker and try again.

Service: For further assistance, contact customer support at 1-800-4-CRAFTSMAN.

Craftsman CMXGWAS020735 Pressure Washer Manual © - All Rights Reserved 2026