Craftsman CMXGWAS020733 Pressure Washer Manual

The Craftsman CMXGWAS020733 is a powerful pressure washer designed for efficient cleaning of various surfaces. With a 2700 PSI and a 2.3 GPM flow rate, it is ideal for tackling tough dirt and grime on driveways, decks, and vehicles. This manual provides essential information on safety, features, setup, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Pressure Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: 2700 PSI pressure output, 2.3 GPM flow rate, 25-foot high-pressure hose, adjustable spray nozzle, and onboard detergent tank.

FeatureDescription
2700 PSIPowerful pressure for effective cleaning
2.3 GPMHigh flow rate for efficient cleaning
25-foot hoseExtended reach for cleaning large areas
Adjustable nozzleCustomize spray pattern for different tasks
Onboard detergent tankConvenient storage for cleaning solutions
Easy start engineReliable starting with minimal effort
WheelsEasy maneuverability

Installation

Unpack the pressure washer and check for all components. Place the unit on a stable surface.

  1. Attach the handle: Securely fasten the handle to the main unit.
  2. Connect the high-pressure hose: Ensure it is tightly secured to the pump and spray gun.
  3. Fill the detergent tank: Use appropriate cleaning solution.
  4. Connect to water supply: Ensure a secure connection to a garden hose.

WARNING! Always check for leaks before operating. Ensure the unit is on a flat surface.

First-Time Setup

Power on the pressure washer; follow the setup instructions.

  1. Connect to water supply: Ensure the water is turned on before starting the engine.
  2. Start the engine: Follow the starting procedure outlined in the manual.
  3. Adjust spray nozzle: Set the nozzle to the desired spray pattern.
  4. Test operation: Run the pressure washer to ensure proper function.

CAUTION! Always wear protective gear while operating the pressure washer.

Specifications

Controls and Settings

Access controls on the pressure washer for adjusting pressure and spray settings. Key controls include the throttle, choke, and spray nozzle adjustment.

Throttle: Controls engine speed and pressure output.

Choke: Used for starting the engine in cold conditions.

Spray Nozzle: Adjusts the spray pattern from wide to narrow.

Connecting Accessories

Ensure the pressure washer is off before connecting any accessories.

  1. Attach the spray gun: Ensure it clicks into place.
  2. Connect additional nozzles: Match the nozzle to the task at hand.
  3. Use extension hoses if needed: Ensure compatibility with the existing hose.

Tip: Always check connections for leaks before use.

Operating the Pressure Washer

Follow these steps to operate the pressure washer safely and effectively.

  1. Start the engine: Follow the starting procedure.
  2. Adjust the throttle: Set to the desired pressure level.
  3. Begin cleaning: Use the spray gun to direct water at the surface.
  4. Shut down: Turn off the engine and disconnect the water supply.

WARNING! Never point the spray gun at people or animals.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Troubleshooting

SymptomPossible CauseCorrective Action
Engine won't startFuel or choke issueCheck fuel level and choke position.
No pressureBlocked nozzle or hoseInspect and clean nozzle and hose.
Excessive vibrationLoose componentsTighten all screws and bolts.
Water leaksDamaged hosesInspect hoses for damage and replace if necessary.

Reset: Refer to the manual for reset procedures if applicable.

Service: For assistance, contact customer service at 1-800-4-Craftsman.

Craftsman CMXGWAS020733 Pressure Washer Manual © - All Rights Reserved 2026