Craftsman C950-679620 Pressure Washer manual

The Craftsman C950-679620 is a powerful pressure washer designed for efficient cleaning of various surfaces. It features a 2800 PSI engine, a 2.3 GPM water flow rate, and comes equipped with multiple nozzles for different cleaning tasks. Ideal for driveways, patios, decks, and vehicles, this pressure washer combines performance with ease of use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Pressure Washer 8. Maintenance and Care 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 2800 PSI engine, adjustable spray nozzle, detergent tank, 25-foot high-pressure hose, and ergonomic handle.

FeatureDescription
2800 PSI EngineProvides powerful cleaning capability for tough stains.
Adjustable Spray NozzleAllows for different spray patterns for various cleaning tasks.
Detergent TankIntegrated tank for easy application of cleaning solutions.
25-foot High-Pressure HoseLong reach for cleaning large areas without moving the unit.
Ergonomic HandleDesigned for comfort and ease of maneuverability.

Installation

Unpack the pressure washer and inspect all components. Place the unit on a flat surface.

  1. Attach the high-pressure hose to the pressure washer and the spray gun.
  2. Connect the water supply hose to the water inlet.
  3. Fill the detergent tank if using detergent.
  4. Plug the unit into a grounded outlet.

WARNING! Ensure the unit is off before making connections to avoid injury.

First-Time Setup

Power on the pressure washer; follow the setup instructions.

  1. Check all connections: Ensure hoses are securely attached.
  2. Turn on the water supply: Make sure there are no leaks.
  3. Start the engine: Follow the starting procedure in the manual.
  4. Test the spray: Adjust the nozzle and test the pressure.

CAUTION! Always wear protective gear while operating the pressure washer.

Specifications

Controls and Settings

Access controls on the pressure washer for adjusting pressure and spray settings. The spray gun features a trigger lock for safety.

Controls: On/Off switch, pressure adjustment knob, and detergent control.

Connecting Accessories

Connect various accessories such as brushes and extension wands for enhanced cleaning.

  1. Ensure the pressure washer is off before connecting accessories.
  2. Match the accessory to the spray gun attachment.
  3. Test the connection before use.

Tip: Use the right accessory for the job to achieve optimal results.

Operating the Pressure Washer

Follow these steps to operate the pressure washer safely and effectively.

  1. Start the engine and allow it to warm up.
  2. Adjust the spray nozzle to the desired setting.
  3. Begin cleaning from a distance, gradually moving closer to the surface.
  4. Turn off the engine and disconnect the water supply when finished.

WARNING! Never point the spray gun at people or animals.

Maintenance and Care

Regular maintenance is essential for optimal performance. Follow these guidelines.

Safety Information

Always follow safety precautions when operating the pressure washer.

Troubleshooting

SymptomPossible CauseCorrective Action
Engine won't startFuel issueCheck fuel level and quality; ensure choke is set correctly.
No pressureClogged nozzleClean or replace the nozzle; check hose for kinks.
Water leaksLoose connectionsTighten all hose connections; inspect for damage.
Excessive vibrationUnbalanced engineCheck for debris around the engine; ensure proper assembly.

Reset: Follow the manual for resetting the unit if necessary.

Service: Contact customer support for further assistance.

Craftsman C950-679620 Pressure Washer manual © - All Rights Reserved 2026