Craftsman 99063 Pressure Washer Manual

The Craftsman 99063 Pressure Washer is a powerful cleaning tool designed for residential use. It features a 190cc engine, delivering up to 2800 PSI of pressure and 2.3 GPM water flow, making it ideal for cleaning driveways, decks, and vehicles. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Accessories 7. Operating the Pressure Washer 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: 190cc engine, 2800 PSI pressure, 2.3 GPM flow rate, 25-foot high-pressure hose, adjustable spray nozzle, and detergent tank.

FeatureDescription
Engine190cc engine for powerful performance
PressureUp to 2800 PSI for tough cleaning tasks
Flow Rate2.3 GPM for efficient water usage
Hose25-foot high-pressure hose for extended reach
NozzleAdjustable spray nozzle for different cleaning needs
Detergent TankBuilt-in tank for easy detergent application
WheelsLarge wheels for easy mobility
Safety FeaturesAutomatic shut-off and safety lock

Installation

Unpack and inspect contents. Assemble the pressure washer on a stable surface.

  1. Attach the handle: Secure the handle to the main unit using provided screws.
  2. Connect the hose: Attach the high-pressure hose to the pump and spray gun.
  3. Fill the detergent tank: Use appropriate detergent for pressure washers.
  4. Plug into AC power: Ensure the unit is off before plugging in.

WARNING! Ensure all connections are secure and check for leaks before use.

First-Time Setup

Power on the pressure washer; follow the setup instructions.

  1. Check oil level: Ensure the engine oil is filled to the recommended level.
  2. Connect water supply: Attach a garden hose to the water inlet.
  3. Prime the pump: Pull the trigger on the spray gun to release air.
  4. Start the engine: Follow the starting instructions in the manual.

CAUTION! Always wear safety goggles and gloves when operating.

Specifications

Controls and Settings

Access controls on the front panel: Engine start/stop, pressure adjustment, and detergent application.

Spray Gun: Trigger lock, adjustable nozzle, and safety features.

Maintenance settings: Oil check, filter cleaning, and hose inspection.

Connecting Accessories

Connect accessories such as surface cleaners and extension wands for enhanced cleaning.

  1. Turn off the pressure washer before connecting accessories.
  2. Ensure compatibility with the spray gun and hose.
  3. Follow the manufacturer's instructions for each accessory.

Tip: Use only recommended accessories to avoid damage.

Operating the Pressure Washer

Follow these steps for effective operation:

  1. Start the engine: Follow the starting procedure in the manual.
  2. Adjust pressure: Set the desired pressure level using the control knob.
  3. Begin cleaning: Aim the nozzle at the surface and pull the trigger.
  4. Stop the engine: Release the trigger and turn off the engine.

WARNING! Never point the spray gun at yourself or others.

Maintenance and Care

Regular maintenance is essential for optimal performance.

  1. Check oil level regularly and change as needed.
  2. Clean the air filter and replace if damaged.
  3. Inspect hoses for wear and tear.
  4. Store in a dry place when not in use.

CAUTION! Always disconnect the spark plug before performing maintenance.

Troubleshooting

SymptomPossible CauseCorrective Action
Engine won't startFuel issueCheck fuel level and quality; ensure choke is set correctly.
No pressureClogged nozzleClean or replace the nozzle; check hose connections.
Leaks from hoseDamaged hoseInspect hose for damage; replace if necessary.
Excessive vibrationLoose partsTighten all screws and bolts; check for loose components.

Reset: Follow the reset procedure in the manual if available.

Service: For assistance, contact Craftsman customer service.

Craftsman 99063 Pressure Washer Manual © - All Rights Reserved 2026